Publish time：2019-12-26 21:16:14
High energy density (620Wh/Kg)
Application:
CMOS memory chips are used in PCs, office automation devices, remote data logging and data acquisition systems, medical instruments, water or gas gauges, security and alarm systems, pulse-/event counters, various industrial clocks, and high-temperature systems.
Feature:
(1) high energy density up to 420WH/Kg(800WH/dm3).
(2) High operation voltage, 3.3V~3.6V upon loading resistance.
(3) Long storage life, less than 2% of the self-discharging rate per year, could be stored for 10~15 years at room temperature.
(4) The non-magnetic stainless steel case is hermetically sealed, making it safe for transportation and general shock. There is no leakage problem.
Due to the characteristics of Li-SOCl2 batteries,
there are three basic types:
А. ENERGY TYPE BATTERY
(1). Bobbin Type, high capacity, shelf life is ten years;
(2). Wide operating temperature range, -55 °C~+85°C.
(3). Smooth voltage level, 90% capacity could be outputted at a high level.
Type | Nominal capacity | Nominal voltage | Operating current | STD mA | Cut off voltage | Dimension | |||
GB | IEC | mAh | V | continuous | pulse | current mA | V | dia. | |
. | 1200 | 9.0 | 35 | 100 | 0.5 | 5.4 | 48.8*26*16.9 | ||
1/2AAA | 400 | 3.6 | 5 | 10 | 0.5 | 2.0 | 10.4 | ||
AAA | 750 | 3.6 | 15 | 50 | 1.0 | 2.0 | 10.3 | ||
1/3AA | 600 | 3.6 | 8 | 10 | 1.0 | 2.0 | 13.6 | ||
ER14200 | 600 | 3.6 | 10 | 15 | 1.0 | 2.0 | 14.5 | ||
1/2AA | 1200 | 3.6 | 20 | 50 | 1.0 | 2.0 | 14.5 | ||
2/3AA | 1650 | 3.6 | 50 | 100 | 1.0 | 2.0 | 14.5 | ||
AA | 2400 | 3.6 | 70 | 150 | 1.0 | 2.0 | 14.5 | ||
ER17250 | 1000 | 3.6 | 100 | 200 | 1.0 | 2.0 | 17.0 | ||
2/3A | 1900 | 3.6 | 100 | 200 | 0.5 | 2.0 | 17.0 | ||
ER17450 | 3000 | 3.6 | 100 | 200 | 3.0 | 2.0 | 17.0 | ||
A | 3400 | 3.6 | 120 | 200 | 2.0 | 2.0 | 17.0 | ||
4000 | 3.6 | 100 | 200 | 3.0 | 2.0 | 18.5 | |||
ER26250 | 1/2C | 3000 | 3.6 | 30 | 200 | 1.0 | 2.0 | 26.2 | |
C | 8500 | 3.6 | 150 | 300 | 2.0 | 2.0 | 26.2 | ||
CC | 15000 | 3.6 | 100 | 400 | 1.0 | 2.0 | 26.2 | ||
D | 19000 | 3.6 | 230 | 400 | 2.0 | 2.0 | 34.2 | ||
DD | 36000 | 3.6 | 200 | 400 | 3.0 | 2.0 | 34.0 | ||
ER10280 | 450 | 3.6 | 10 | 20 | 0.5 | 2.0 | 10.4 | ||
B. POWER TYPE THIN LITHIUM BATTERY
(1) high discharge rate, and you can always consult our engineer for even higher discharge rate;
(2) have large continuous or pulsed current and significant output power for more than five years.
(3) lower resistance, smooth voltage level.
Type | Nominal Capacity | Nominal Voltage | Operating current mA(max) | STD mA | Cut off | Dimension mm(max) | |||
GB | IEC | mAh | V | Continuous | Pulse | Current mA | V | Dia. | H |
AAA | 600 | 3.6 | 50 | 100 | 10 | 2.0 | 10.2 | 45.0 | |
1/2AA | 600 | 3.6 | 50 | 100 | 10 | 2.0 | 14.5 | 25.0 | |
2/3AA | 1000 | 3.6 | 50 | 100 | 50 | 2.0 | 14.5 | 33.5 | |
AA | 1600 | 3.6 | 100 | 200 | 20 | 2.0 | 14.5 | 50.5 | |
ER17335S | A2/3 | 1500 | 3.6 | 100 | 200 | 1 | 2.0 | 17.0 | 33.5 |
A | 3100 | 3.6 | 200 | 400 | 30 | 2.0 | 17.5 | 50.5 | |
5500 | 3.6 | 300 | 600 | 55 | 2.0 | 17.5 | 100.5 | ||
3200 | 3.6 | 1000 | 2000 | 100 | 2.0 | 18.8 | 50.5 | ||
C | 5500 | 3.6 | 200 | 300 | 4 | 2.0 | 26.2 | 50.0 | |
ER251020S | CC | 9500 | 3.6 | 100 | 200 | 100 | 2.0 | 24.5 | 102 |
CC | 13000 | 3.6 | 800 | 1200 | 50 | 2.0 | 26.2 | 102 | |
D | 13000 | 3.6 | 200 | 400 | 10 | 2.0 | 34.0 | 61.5 | |
DD | 28000 | 3.6 | 300 | 600 | 100 | 2.0 | 34.0 | 124.5 | |
DD(small DD) | 28000 | 3.6 | 1800 | 2000 | 100 | 2.0 | 32.5 | 127 | |
Available Tags/pin/Terminations for ER Batteries(click)
|
C. Hi-temperature ER batteries and battery packs for Oil and Gas liSOCl2 high-temperature batteries and packs Petroleum industry: downhole high-temperature electronic pressure gauge, flowmeter, MWD (LWD, MWD), and other downhole high-temperature instruments requiring batteries (connectors and battery packs can be installed according to user requirements). Automobile industry: tire pressure alarm (TPMS), diesel cylinder detection, etc. Geothermal industry: high-temperature detection instrument Military fields and other equipment that need to use batteries in high-temperature environment. |
Тип | Номинальный Емкость | Номинальный Напряжение | Рабочий ток мА(макс) | ЗППП мА | Отключение | Измерение мм(макс) | Масса | |||
ГБ | МЭК | мАч | В | Непрерывный | Пульс | Ток мА | В | Диам. | ЧАС | Г |
ААА | 600 | 3.6 | 50 | 100 | 10 | 2.0 | 10.2 | 45.0 | 9 | |
1/2АА | 600 | 3.6 | 50 | 100 | 10 | 2.0 | 14.5 | 25.0 | 10 | |
2/3АА | 1000 | 3.6 | 50 | 100 | 50 | 2.0 | 14.5 | 33,5 | 14 | |
АА | 1600 | 3.6 | 100 | 200 | 20 | 2.0 | 14.5 | 50,5 | 20 | |
ER17335S | А2/3 | 1500 | 3.6 | 100 | 200 | 1 | 2.0 | 17.0 | 33,5 | 20 |
А | 3100 | 3.6 | 200 | 400 | 30 | 2.0 | 17.5 | 50,5 | 26 | |
5500 | 3.6 | 300 | 600 | 55 | 2.0 | 17.5 | 100,5 | 46 | ||
3200 | 3.6 | 1000 | 2000 | 100 | 2.0 | 18.8 | 50,5 | 32 | ||
С | 5500 | 3.6 | 200 | 300 | 4 | 2.0 | 26.2 | 50.0 | 52 | |
ER251020S | СС | 9500 | 3.6 | 100 | 200 | 100 | 2.0 | 24,5 | 102 | 102 |
СС | 13000 | 3.6 | 800 | 1200 | 50 | 2.0 | 26.2 | 102 | 103,5 | |
Д | 13000 | 3.6 | 200 | 400 | 10 | 2.0 | 34.0 | 61,5 | 100 | |
ДД | 28000 | 3.6 | 300 | 600 | 100 | 2.0 | 34.0 | 124,5 | 200 | |
ДД(маленький ДД) | 28000 | 3.6 | 1800 | 2000 | 100 | 2.0 | 32,5 | 127 | 20 | |
ER High-Temperature LTC Battery Packs
Тип | Напряжение (В) | Емкость (Ах) | Внешний диаметр/длина | Макс. импульсный ток (мА) | Рабочая температура |
36.5 | 14 | 38×900 | 1000 | -40~150/180 | |
29.0 | 29.0 | 37,5 ×1185 | 1500 | -40~150/180 | |
28.8-29.2 | 27.0 | 37,5 | 1200 | -40~150/180 | |
29.0 | 29.0 | 37,5×1150 | 1500 | -40~150/180 | |
28.8-29.2 | 29.0 | 37,5×1150 | 1500 | -40~150/180 | |
36.5 | 29.0 | 37,0×1455,0 | 1500 | -40~150/180 | |
21.9 | 9.0 | 50,5 × 190,2 | 300 | -40—150/180 | |
29.0 | 29.5 | 37,5×1190,0 | 1500 | -40~150/180 | |
14.6 | 29.0 | 37×1805.0 | 1500 | -40~150/180 | |
21.0 | 14.0 | 38.0×495 | 1000 | -40~150/180 | |
29.0 | 14.0 | 30×1010 | 10000 | -40~150/180 | |
11.0 | 9.0 | 26,5×362 | 500 | -40~150/180 |
Customer request form :
Available pins for your reference:
MWD BATTERY PACKS 28.8V 28AH 
Li-SOCl2 battery Caution :
(1) Do not make the battery short-circuit and do not try to charge it.
(2)Do not over-discharge, press, or burn the battery.
(3) The battery should be removed from the instrument on time when finishing discharging.
(4)The battery should be buried deeply.
(5)Do not try to solder directly on the battery.
(6) The high-temperature type Li-soc12 battery can not be used an environment above +160
PRISMATIC Li/SOCl2 BATTERY
Model | Nominal | Nominal Voltage | End Voltage | Operating Current | Operating Current | Dimensions | Weight |
(mAh) | (V) | (V) | (mAh) | mA (Max.) | (mm) Max. | (g) | |
400mAh | 3.6V | 2.0V | 0.5mA | 5 | 16.8×6.8×15.8 | 5 | |
550mAh | 3.6V | 2.0V | 1.0mA | 10 | 16.8×6.8×20.8 | 7 | |
750mAh | 3.6V | 2.0V | 1.0mA | 10mA | 16.8×6.8×25.8 | 8 | |
1600mAh | 3.6V | 2.0V | 1.0mA | 25 | 23.3×7.5×38.3 | 20 |
The energy type can be equipped with capacitors to raise pulse current, please contact GMB for details: info@gmbattery.com
WAFER LI-SOCL2 BATTERY
| Model | Cell Size Ref | Nominal Voltage (V) | Nominal Capacity (Ah) | Nominal Discharge Current(mA) | Maximum Dimensions | Weight(g) | |
Diameter(mm) | Height(mm) | ||||||
ER22G68 | 3.6 | 0.4 | 0.5 | 22.6 | 6.8 | 6 | |
1/10D | 3.6 | 1.0 | 1 | 32.9 | 7.1 | 19 | |
1/6D | 3.6 | 1.7 | 1 | 32.9 | 10.5 | 24 | |
ER49L65 | 3.6 | 2.6 | 2.5 | 49.5 | 6.8 | 44 | |
Available Cell Terminations(click) |
Customer request form
MAIN FEATURES OF A HI-TEMP. TLC BATTERY PACK
The specific energy is large, up to 420Wh/Kg, and the maximum open-circuit voltage of 650Wh/Kg battery is 3.67V when discharging at a low rate. The voltage can be kept at 3.3-35V when discharging, and the voltage remains unchanged within 90% of the capacity range. The specific power is large, and the battery can discharge at a high current density. The voltage accuracy is high, and the discharge curve is very flat. The working temperature of a high-temperature battery can reach 120~200C. Good storage performance can be used for 5-10 years. Fully sealed design
......
Customer request form
Li-SOCl2 battery Caution :
(1) Do not make the battery short-circuit and do not try to charge it.
(2) Do not over-discharge , press or burn the battery.
(3) The battery should be removed from the instrument on time when finishing discharging.
(4) The battery should be buried deeply in earth .
(5) Do not try to solder directly on battery.
(6) The high temperature type Li-soc12 battery can not be used at environment above +160
| ER Battery Production Brief Workflow |
1.Cathode Mixer |
|
|
|
| 3.Cathode Molding System Forming the Cathode into Circular Balls with Preset Size. Automatically Controlled System to Ensure Cathode Density. |
|
| 4.Automatic Nickel Tab Welding Machine Automatic Spot Welding Nickel Tabs on Both Ends of Battery to Ensure the Quality of Welding and Precise Locations. |
 |
| 5.Dehumidifier System Four High Quality Dehumidifiers Generating Large Flow of Dry Air to Reduce Dew Point of Air in Battery Assembling Rooms and Chambers Below -40℃ Constantly. |
 |
| 6.Automatic Assembling Lines Automatically Positioning Parts and Materials and Assembling Them Properly Together. Using Automatic conveyers to Connect Assembling Steps. Substantially Reducing Labor Required and Human Errors. |
 |
| 7.Anode Assemble Machine Automatically Rolling and Pressing Lithium Strip into Battery Shell |
 |
| 8.Separator Assemble Machine Automatically Installing Separators on Bottom and Side of Battery Shell |
 |
| 9.Cathode Assemble Machine Automatically Putting Preset Quantity of Ball Shape Cathode into Battery Shell |
 |
| 10.Cap Assemble Machine Automatically Pressing Battery Cap Firmly Sealed with Battery Shell |
 |
| 11.Internal Shorting Testing Machine Automatically Testing Internal Resistance After Cap Installed and Rejecting Failed Battery |
 |
| 12.Epoxy Applying Machine Automatically Applying Epoxy on Battery Cap to Prevent Shorting |
 |
| 13.Polishing Machine Automatically Polishing Both Positive and Negative Electrodes to Make Tab Welding More Firmly |
 |
| 14.Sleeve Installation System Automatically Feeding Sleeve and Wrapping Properly Around Battery. Shrinking Battery Sleeve Through Hot Air Chamber. |
 |
15.Automatic Testing Machine Automatically Testing Open Circuit Voltage and Voltage with Load and Rejecting failed Battery |
 |
| 16.Automatic Tab Welding Machine Automatically Spot Welding Nickel Tabs on Both Ends of Battery. Measuring OCV after Tabs Installed. Tracking and Recording Entire Process for Inspection. |
 |
| 17.ER Battery Finishing & Packing Lines Installing Battery Connectors & Packing Batteries According to Customer' s requests. Inspecting Final Products. |
 |
| 18.Battery Aging Room with Controlled Temperature Storing Batteries in Rooms with Temperature Controlled Under 28℃ Yearly Long. |
 |
| 19.Battery Testing System Testing Battery OCV, Voltage with Load and Capacity for Constant Currents & Constant Resistances. Simultaneously Testing Over 2,00 Batteries. |
 |
| 20.Fourier Transform Infrared Spectroscopy Accurately Measuring Water Containing in Electrolyte |
 |
| 21.Environmental Testing Room Testing Battery According to Military Specifications Including Vibration, Shock, Temperature Cycling, High Humidity, Low Pressure…. |
 |
Customer request form
Li-SOCl2 battery Caution :
(1) Do not make the battery short-circuit and do not try to charge it.
(2) Do not over-discharge , press or burn the battery.
(3) The battery should be removed from the instrument on time when finishing discharging.
(4) The battery should be buried deeply in earth .
(5) Do not try to solder directly on battery.
(6) The high temperature type Li-soc12 battery can not be used at environment above +160
.jpg)
